Ultra-fast Data Processing At Nanoscale

Advancement in nanoelectronics, which is the use of nanotechnology in electronic components, has been fueled by the ever-increasing need to shrink the size of electronic devices like nanocomputers in a bid to produce smaller, faster and smarter gadgets such as computers, memory storage devices, displays and medical diagnostic tools.

While most advanced electronic devices are powered by photonics – which involves the use of photons to transmit informationphotonic elements are usually large in size and this greatly limits their use in many advanced nanoelectronics systems. Plasmons, which are waves of electrons that move along the surface of a metal after it is struck by photons, holds great promise for disruptive technologies in nanoelectronics. They are comparable to photons in terms of speed (they also travel with the speed of light), and they are much smaller. This unique property of plasmons makes them ideal for integration with nanoelectronics. However, earlier attempts to harness plasmons as information carriers had little success.

Addressing this technological gap, a research team from the National University of Singapore (NUS) has recently invented a novel “converter” that can harness the speed and small size of plasmons for high frequency data processing and transmission in nanoelectronics.

This innovative transducer can directly convert electrical signals into plasmonic signals, and vice versa, in a single step. By bridging plasmonics and nanoscale electronics, we can potentially make chips run faster and reduce power losses. Our plasmonic-electronic transducer is about 10,000 times smaller than optical elements. We believe it can be readily integrated into existing technologies and can potentially be used in a wide range of applications in the future,” explained Associate Professor Christian Nijhuis from the Department of Chemistry at the NUS Faculty of Science, who is the leader of the research team behind this breakthrough.

This novel discovery was first reported in the journal Nature Photonics.

Source: http://news.nus.edu.sg/

The First Satellite Using Quantum Cryptography Is Chinese

Congratulations are in order for China: by launching the world’s first quantum communications satellite, the country has achieved an interesting — if somewhat difficult to explain — milestone in space and cryptography.

quantum dots

Quantum Experiments at Space Scale (QUESS), nicknamed Micius after the philosopher, lifted off from Jiuquan Satellite Launch Center at 1:40 AM local time (late yesterday in the U.S.) and is currently maneuvering itself into a sun-synchronous orbit at 500 km.

So what’s in the package that’s so exciting?

QUESS is an experiment in the deployment of quantum cryptography — specifically, a prototype that will test whether it’s possible to perform this delicate science from space. Inside QUESS is a crystal that can be stimulated into producing two photons that are “entangled” at a subatomic, quantum level. Entangled photons have certain aspects — polarization, for example — that are the same for both regardless of distance; if one changes, the other changes. The trouble is that photons are rather finicky things, and tend to be bounced, absorbed, and otherwise interfered with when traveling through fibers, air, and so on. QUESS will test whether sending them through space is easier, and whether one of a pair of entangled photons can be successfully sent to the surface while the other remains aboard the satellite.

If this is possible, the entangled photons can be manipulated in order to send information; the satellite could, for example, send binary code by inverting its photon’s polarization, one way for 1, the other way for 0. The ground station would see its photon switching back and forth and record the resulting data. This process would be excruciatingly slow, but fast enough for, say, key creation and exchange — after which data can be exchanged securely by more ordinary means. The critical thing about this is that there is no transmission involved, or at least not one we understand and can intercept.

Source: https://techcrunch.com/

Solar Cells Collect 30 Times More From Sun’s Photons

By combining designer quantum dot light-emitters with spectrally matched photonic mirrors, a team of scientists with Berkeley Lab and the University of Illinois created solar cells that collect blue photons at 30 times the concentration of conventional solar cells, the highest luminescent concentration factor ever recorded. This breakthrough paves the way for the future development of low-cost solar cells that efficiently utilize the high-energy part of the solar spectrum.


 Solar (or photovoltaic) cells convert the sun’s energy into electricity. Whether they’re adorning your calculator or orbiting our planet on satellites, they rely on the the photoelectric effect: the ability of matter to emit electrons when a light is shone on it. Silicon is what is known as a semi-conductor, meaning that it shares some of the properties of metals and some of those of an electrical insulator, making it a key ingredient in solar cells. Let’s take a closer look at what happens when the sun shines onto a solar cell.
Sunlight is composed of miniscule particles called photons, which radiate from the sun. As these hit the silicon atoms of the solar cell, they transfer their energy to loose electrons, knocking them clean off the atoms. The photons could be compared to the white ball in a game of pool, which passes on its energy to the coloured balls it strikes. Freeing up electrons is however only half the work of a solar cell: it then needs to herd these stray electrons into an electric current. This involves creating an electrical imbalance within the cell, which acts a bit like a slope down which the electrons will flow in the same direction. Creating this imbalance is made possible by the internal organisation of silicon.

Source: http://newscenter.lbl.gov/

How To Make Solar Energy Conversion More Efficient

When it comes to installing solar cells, labor cost and the cost of the land to house them constitute the bulk of the expense.  The solar cells – made often of silicon or cadmium telluride – rarely cost more than 20 percent of the total costSolar energy could be made cheaper if less land had to be purchased to accommodate solar panels, best achieved if each solar cell could be coaxed to generate more power.

A huge gain in this direction has now been made by a team of chemists at the University of California, Riverside (UCR) that has found an ingenious way to make solar energy conversion more efficientThe researchers report in Nano Letters that by combining inorganic semiconductor nanocrystals with organic molecules, they have succeeded in “upconvertingphotons in the visible and near-infrared regions of the solar spectrum.


Solar-panels UCRChemists at the University of California, Riverside have found an ingenious way to make solar energy conversion more efficient

The infrared region of the solar spectrum passes right through the photovoltaic materials that make up today’s solar cells,” explained Christopher Bardeen, a professor of chemistry. The research was a collaborative effort between him and Ming Lee Tang, an assistant professor of chemistry. “This is energy lost, no matter how good your solar cell.  The hybrid material we have come up with first captures two infrared photons that would normally pass right through a solar cell without being converted to electricity, then adds their energies together to make one higher energy photon.  This upconverted photon is readily absorbed by photovoltaic cells, generating electricity from light that normally would be wasted.”

Source: http://ucrtoday.ucr.edu/